Conference Proceeding
Search Keywords - Manufacturing
Releted Proceeding
Releted Papers
| Waste Management In The Palm Oil Industry: A Case Study of Co-Composting of Oil Palm Empty Fruit Bunches And Decanter Cake Slurry | |||||||||||
| Page(s): | 31-35 | ||||||||||
| Author | Nutthatus Cherypiew, Thunwadee Tachapattaworakul Suksaroj | ||||||||||
|
|||||||||||
| A Strategy for Reliability Evaluation and Fault Diagnosis of Autonomous Underwater Gliding Robot based on its Fault Tree | |||||||||||
| Page(s): | 1-7 | ||||||||||
| Author | Koorosh Aslansefat, Gholamreza Latif-Shabgahi, Mojtaba Kamarlouei | ||||||||||
|
|||||||||||
| Optimal Buffer Allocation for Remanufacturing System Using Meta-Heuristic Algorithm | |||||||||||
| Page(s): | 1-7 | ||||||||||
| Author | V. A. Pourghadim, Mahdi Abbasgholipour, Leyla Asghari | ||||||||||
|
|||||||||||
| Code-Driven Boundary Scan Testing | |||||||||||
| Page(s): | 35-38 | ||||||||||
| Author | Salim A. Jayousi, Mohd Saufee Muhammad | ||||||||||
|
|||||||||||
| Application of Ranked Positional Weight in Detecting Resource Conflicts in Construction Project | |||||||||||
| Page(s): | 17-24 | ||||||||||
| Author | Chalita Surinrat, Pornthep Anussornnitisarn, Sudaratana Wongweragiat | ||||||||||
|
|||||||||||
| A New Robust Design Modeling Method Based On Generalized Regression Neural Network | |||||||||||
| Page(s): | 74-78 | ||||||||||
| Author | Tuan-Ho Le, Sangmun Shin, Hwa-il Kim, Sittichai Kaewkuekool | ||||||||||
|
|||||||||||
| Role of Ethical Factors In 5s And Tpm Implementation: Study of Kurdish Cement Industry, Iraq | |||||||||||
| Page(s): | 38-45 | ||||||||||
| Author | Jamal Ahmed Hama Kareem, Noraini Abu Talib | ||||||||||
|
|||||||||||
| Openness To Organizational Change: A Case Study For The Romanian Organizations | |||||||||||
| Page(s): | 19-24 | ||||||||||
| Author | Mariana Predișcan, Roxana Nadina Roiban | ||||||||||
|
|||||||||||
| Application of Ranked Positional Weight in Detecting Resource Conflicts in Construction Project | |||||||||||
| Page(s): | 65-72 | ||||||||||
| Author | Chalita Surinrat, Pornthep Anussornnitisarn, Sudaratana Wongweragiat | ||||||||||
|
|||||||||||
| A Review On Advanced Joining Techniques Of Multi Material Part Manufacturing For Automotive Industry | |||||||||||
| Page(s): | 51-56 | ||||||||||
| Author | Celalettin Yuce, Fatih Karpat, Nurettin Yavuz, Oguz Dogan | ||||||||||
|
|||||||||||
| Effect Of Strontium On Surface Roughness And Chip Morphology When Turning Al-Si Cast Alloy Using Carbide Tool Insert | |||||||||||
| Page(s): | 46-49 | ||||||||||
| Author | Mohsen Marani Barzani, Ahmed A.D Sarhan, Saeed Farahany, Ramesh Singh | ||||||||||
|
|||||||||||
| Artificial Nueral Network Approach To Industrial Demand Forecast | |||||||||||
| Page(s): | 43-47 | ||||||||||
| Author | Prasanna Kumar, Mervin Herbert, Srikanth Rao | ||||||||||
|
|||||||||||
| Wastewater Treatment Facility Of Hideco Sugar Milling Company (HISUMCO) In Kananga, Leyte Philippines: A Key To Environmental Management | |||||||||||
| Page(s): | 60-65 | ||||||||||
| Author | Neil L. Egloso, Chona L. Icay, Sherwin S. Seville | ||||||||||
|
|||||||||||
| Code-Driven Boundary Scan Testing | |||||||||||
| Page(s): | 35-38 | ||||||||||
| Author | Salim A. Jayousi, Mohd Saufee Muhammad | ||||||||||
|
|||||||||||
| Hybrid Simulation MILP Optimization In A Remanufacturing System | |||||||||||
| Page(s): | 32-38 | ||||||||||
| Author | Patsorn Thammatadatrakul, Navee Chiadamrong | ||||||||||
|
|||||||||||
| Development Of Work Instruction Application Software For A Chemical Batch Process Industry | |||||||||||
| Page(s): | 57-60 | ||||||||||
| Author | Anuwat Yamgosum, Pisal Yenradee | ||||||||||
|
|||||||||||
| Lean Assessment For Manufacturing Of Rubber Industry In The Northeast Of Thailand: A Case Industry Of Small And Medium Enterprises (SMES) | |||||||||||
| Page(s): | 19-24 | ||||||||||
| Author | Chanchai Laoha, Seekharin Sukto | ||||||||||
|
|||||||||||
| Wastewater Treatment Facility Of Hideco Sugar Milling Company (Hisumco) In Kananga, Leyte Philippines: A Key To Environmental Management | |||||||||||
| Page(s): | 42-47 | ||||||||||
| Author | Neil L. Egloso, Chona L. Icay, Sherwin S. Seville | ||||||||||
|
|||||||||||
| Flexible Fixturing Systems For Low Production Quantities | |||||||||||
| Page(s): | 56-58 | ||||||||||
| Author | Fatih Hayati Cakir, Selim Gurgen, Mehmet Alper Sofuoglu, Osman Nuri Celik, Melihcemalkushan, Sezan Orak | ||||||||||
|
|||||||||||
| Study Of The Effect Of Machining Parameters On End Milling Cutting Force Of Hardened 65 Manganese Steel | |||||||||||
| Page(s): | 31-35 | ||||||||||
| Author | Abubakarbuhari, Liu Ping | ||||||||||
|
|||||||||||
| Various Methodologies For Assessment Of Surface Quality | |||||||||||
| Page(s): | 36-39 | ||||||||||
| Author | K. H. Inamdar | ||||||||||
|
|||||||||||
| Fuzzy Recycle Planning For The Green Supply Chain Management | |||||||||||
| Page(s): | 14-17 | ||||||||||
| Author | Chun-Wei R. Lin, Oliver L. Hung, Yun-Jiuan M. Parng,Chia-Heng Chang | ||||||||||
|
|||||||||||
| Cutting Edge Preparation | |||||||||||
| Page(s): | 26-30 | ||||||||||
| Author | Varun Ramesh | ||||||||||
|
|||||||||||
| Assessment of the impact of technology management practices on the competitive advantage of Kuwaiti Textiles, clothing and leather industries | |||||||||||
| Page(s): | 16-20 | ||||||||||
| Author | Shereefa Abdullah Al-Essa, Refaat Abdel-Razeg, Mansour Abo Gamila | ||||||||||
|
|||||||||||
| Adhesive Wear Behavior Of Tin And Crncoated Din115crv3 Steel Tools At Different Load Conditions | |||||||||||
| Page(s): | 69-72 | ||||||||||
| Author | Mustafa Ozgur Oteyaka, Muhammetmustafa Yildirim, Mustafa Ulutan, Osmannuri Celik | ||||||||||
|
|||||||||||
| Reconfigurable SPI Driver For MIPS Soft-Core Processor Using FPGA | |||||||||||
| Page(s): | 66-70 | ||||||||||
| Author | Hesham Alobaisi, Saim Mohammed, Mohammad Awedh | ||||||||||
|
|||||||||||
| Impact Assessment Of Accounting System On The Performance Of Small And Medium Enterprises (Smes) In Bauchi Metropolis, Nigeria | |||||||||||
| Page(s): | 66-70 | ||||||||||
| Author | Mohammed Ibrahim | ||||||||||
|
|||||||||||
| Ranking The Suitable Places For Investment By Fuzzy Topsis And Ahp Approach (Case Study: Areas Of Isfahan Province) | |||||||||||
| Page(s): | 87-91 | ||||||||||
| Author | Masoud Hekmatpanah, Seyed Reza Jalalzadeh, Mohamad Karimian, Hamid Faraghian | ||||||||||
|
|||||||||||
| Information Risk Management In Small And Medium Enterprises In India | |||||||||||
| Page(s): | 1-4 | ||||||||||
| Author | Ashwin.P.Karthik, Adithya Varma, Krithika Ravindran, S.Gopinath | ||||||||||
|
|||||||||||
| Effect Of Country Of Origin On Product Brand Names- A Study Of Indian Market | |||||||||||
| Page(s): | 78-83 | ||||||||||
| Author | Sanjeev Kumar Garg, P.K.Jain | ||||||||||
|
|||||||||||
| Estimating and validating wind turbines’ capacity Factors using a solid mathematical model | |||||||||||
| Page(s): | 25-28 | ||||||||||
| Author | Samuel Refaat, Yasser G. Hegazy, Mahmoud Mostafa, Nabil Hamed | ||||||||||
|
|||||||||||
| Step-Nc Enabled Manufacturing Process Planning Of Sheet Metal Bend Parts | |||||||||||
| Page(s): | 13-17 | ||||||||||
| Author | Zahidfaraz, Liaqat Ali, Syed Waheedulhaq, Mushtaq Khan, Syed Husain Imran Jaffery | ||||||||||
|
|||||||||||
| A Comparison Of Genetic Algorithm With Simulated Annealing For Cell Formation Problem | |||||||||||
| Page(s): | 33-36 | ||||||||||
| Author | Alam Zeba, Mushtaq Khanb, Adnan Tariqc, Nawar Khana, Liaqat Alib, Farooqueazama, Syed Husain Imran Jaffery | ||||||||||
|
|||||||||||
| Application of ECQFD for Enabling Environmentally Conscious Design | |||||||||||
| Page(s): | 6-10 | ||||||||||
| Author | Gopinath Rathod, Vinod Puranik | ||||||||||
|
|||||||||||
| Application of ECQFD for Enabling Environmentally Conscious Design | |||||||||||
| Page(s): | 6-10 | ||||||||||
| Author | Gopinath Rathod, Vinod Puranik | ||||||||||
|
|||||||||||
| Application of ECQFD for Enabling Environmentally Conscious Design | |||||||||||
| Page(s): | 6-10 | ||||||||||
| Author | Gopinath Rathod, Vinod Puranik | ||||||||||
|
|||||||||||
| Factor Affecting Wastes Reducing in Production Processes of Essilor Manufacturing (Thailand) Co., LTD. | |||||||||||
| Page(s): | 46-51 | ||||||||||
| Author | Chitamas Anupong, Manat Pithuncharurnlap, Nuttawut Rojniruttikul | ||||||||||
|
|||||||||||
| The Relevance Of Commodities In The Investment Strategies Of A Portfolio | |||||||||||
| Page(s): | 21-26 | ||||||||||
| Author | Eliana Angelini | ||||||||||
|
|||||||||||
| An Empirical Analysis Of The Relationship Between Foreign Trade And Economic Growth In Central Africa | |||||||||||
| Page(s): | 1-6 | ||||||||||
| Author | Hussaina Abdullahi Yarima, Shuaibu Sidi Safiyanu | ||||||||||
|
|||||||||||
| Development Of Wafer-Level Compression Molding System With The 5-Point Toggle Mechanism | |||||||||||
| Page(s): | 29-33 | ||||||||||
| Author | Hye-Jin Lee, Simo Yeon, Nak-Kyulee, Jeanho Park | ||||||||||
|
|||||||||||
| Independence Of Domestic Gas Consumption On Nigerian Economy | |||||||||||
| Page(s): | 43-49 | ||||||||||
| Author | Ahmed Adamu | ||||||||||
|
|||||||||||
| Correlating Organizational Culture And Level Of Understanding Of Total Quality Management Philosophy Among Manufacturing And Other Related Companies In The Calabarzon Region, Philippines | |||||||||||
| Page(s): | 1-10 | ||||||||||
| Author | Rogel L. Limpiada | ||||||||||
|
|||||||||||
| Lean Assessment For Manufacturing Of Rubber Industry In The Northeast Of Thailand: A Case Industry Of Small And Medium Enterprises (SMES) | |||||||||||
| Page(s): | 40-45 | ||||||||||
| Author | Chanchai Laoha, Seekharin Sukto | ||||||||||
|
|||||||||||
| Lean Assessment For Manufacturing Of Rubber Industry In The Northeast Of Thailand: A Case Industry Of Small And Medium Enterprises (SMES) | |||||||||||
| Page(s): | 36-41 | ||||||||||
| Author | Chanchai Laoha, Seekharin Sukto | ||||||||||
|
|||||||||||
| The Influence Of Green Supply Chain Management On Business Performance Of Electronic Industry In Thailand | |||||||||||
| Page(s): | 22-27 | ||||||||||
| Author | Kankanit Kamolkittiwong, Busba Phruksaphanrat | ||||||||||
|
|||||||||||
| Key Success Factors To Supply Chain Risk Management For Fresh Produce In Modern Trade Of Thailand | |||||||||||
| Page(s): | 34-37 | ||||||||||
| Author | Kirana Keawsoon | ||||||||||
|
|||||||||||
| The Future Of Ramjet And Scramjet Engines In Commercial Operations | |||||||||||
| Page(s): | 52-54 | ||||||||||
| Author | S.R Ajay Krisna, V.A.Darshan, T.A.Aadithya, P.Partheban, Nidhi Vaishakar, Vinjamurihyma | ||||||||||
|
|||||||||||
| Production Improvement For Cost Reduction In Hard Disk Drive Industry By Value Engineering Technique | |||||||||||
| Page(s): | 72-75 | ||||||||||
| Author | Rataphol Sangkhasuk, Kanokporn Arayikanon | ||||||||||
|
|||||||||||
| Tool And Die Standardization – Development And Updating Of Standards | |||||||||||
| Page(s): | 86-92 | ||||||||||
| Author | Gunther Schuh, Martin Pitsch, Thomas Kuhlmann, Max Schippers, Lars Johannsen | ||||||||||
|
|||||||||||
| Optimization Of Casting System For Z-Printed High Temperature Mould Cast Zamak Alloy Via Advanced Simulation Techniques | |||||||||||
| Page(s): | 59-64 | ||||||||||
| Author | Uzair Bin Asim, Anwar Khalil Sheikh | ||||||||||
|
|||||||||||
| A New Automated System Approach and Improvements in Vibratory Mass Finishing Process | |||||||||||
| Page(s): | 36-39 | ||||||||||
| Author | Emir Bayik, Rukiye Ertan | ||||||||||
|
|||||||||||
| A Review on an ETL Process in Business Intelligence System in Telecom and Automobile Sector in Maharashtra | |||||||||||
| Page(s): | 47-52 | ||||||||||
| Author | Shailesh A Kahalekar, Sunil Patil | ||||||||||
|
|||||||||||
| Assessment of the impact of technology management practices on the competitive advantage of Kuwaiti Textiles, clothing and leather industries | |||||||||||
| Page(s): | 16-20 | ||||||||||
| Author | Shereefa Abdullah Al-Essa, Refaat Abdel-Razeg, Mansour Abo Gamila | ||||||||||
|
|||||||||||
| Adaptive Neuro-Fuzzy Inference System (ANFIS) Based Worker Assignment Model For Large Sized Virtual Cells | |||||||||||
| Page(s): | 35-39 | ||||||||||
| Author | Murali R Venkat | ||||||||||
|
|||||||||||
| Comparative Analysis of FDM Model With Z-Printed High Temperature Mould Cast Part: Assessment of Dimensional Precision and Surface Integrity | |||||||||||
| Page(s): | 12-16 | ||||||||||
| Author | Uzair Bin Asim1a, Hassan Iqbal, Anwar Khalil Sheikh | ||||||||||
|
|||||||||||
| High-Performance Hr Practices and Firm Performance: The Mediating Role of Organizational Climate For Innovation and Creativity | |||||||||||
| Page(s): | 19 | ||||||||||
| Author | Darius N. Ikyanyon | ||||||||||
|
|||||||||||
| The Impact of Departmental Interdependence and Organization Structure on Management Accounting Practices (Evidence From Manufacturing Sector of Pakistan) | |||||||||||
| Page(s): | 5-8 | ||||||||||
| Author | Khurram Ashfaq, Rui Zhang, Abdul Waheed, Sohail Younus | ||||||||||
|
|||||||||||
| Networks Boost Up Internationalisation - Indian And Australian Mining Firms | |||||||||||
| Page(s): | 1 | ||||||||||
| Author | Meena Chavan | ||||||||||
|
|||||||||||
| Marketing Strategies In The Globalised Era: A Study With Reference To Asian Paints | |||||||||||
| Page(s): | 10-13 | ||||||||||
| Author | Mohan Balgarkashi | ||||||||||
|
|||||||||||
| Micromachining | |||||||||||
| Page(s): | 62-64 | ||||||||||
| Author | Ilhan Asilturk, Mehmet Alper Ince | ||||||||||
|
|||||||||||
| Optimization Of Injection Moulding Process Parameters For Recycled High Density Polyethylene (RHDPE) Using The Taguchi Method | |||||||||||
| Page(s): | 60-65 | ||||||||||
| Author | Jamaluddin Abdullah, Liau Wai Shan, Hanafi Ismail | ||||||||||
|
|||||||||||
| Multi-Class Support Vector Machines For Texture Classification Using Gray-Level Histogram And Edge Detection Features | |||||||||||
| Page(s): | 1-5 | ||||||||||
| Author | Mohammed W. Ashour, Fatimah Khalid, Alfian Abdul Halin, Samy H. Darwish | ||||||||||
|
|||||||||||
| Approach For Determining Operative Costs In A Dynamic Environment For Decentralized Controlled Pre-Storage Zone | |||||||||||
| Page(s): | 10-14 | ||||||||||
| Author | Lukas Kopecki | ||||||||||
|
|||||||||||
| Particle Size Distribution Of Particle-Bound Pcdd/Fs In The Ambient Air Of Tire Manufacturing Workplaces | |||||||||||
| Page(s): | 51-54 | ||||||||||
| Author | Chia-Hsiang Lai, Ting-Yu Yen | ||||||||||
|
|||||||||||
| Analysis By Numerical Simulation Ofthe Tear Sheet Of Wheelbarrows During Deep Drawing | |||||||||||
| Page(s): | 47-50 | ||||||||||
| Author | Faouzi Hamza, Ouzine Boussaid, Kamel Tadjine | ||||||||||
|
|||||||||||
| Finite Element Analysis of the Wheelbarrows Tear During the Metal Forming | |||||||||||
| Page(s): | 51-54 | ||||||||||
| Author | Faouzi Hamza, Ouzine Boussaid, Kamel Tadjine | ||||||||||
|
|||||||||||
| Development Of Holonic Manufacturing System Contract Net By Considering Component Commonality | |||||||||||
| Page(s): | 26-30 | ||||||||||
| Author | Nila Nurlina, Moses Laksono Singgih | ||||||||||
|
|||||||||||
| Optimization Of Factors Affecting Multirespon Quality Using Hybrid Taguchidesign -Metaheuristic Method (Case Study: Plastic Sacks Production) | |||||||||||
| Page(s): | 31-36 | ||||||||||
| Author | Ramadhana Dio, Moses L. Singgih | ||||||||||
|
|||||||||||
| Optimization Of Batik Fashion Based Cultural Heritage As A Competitive Advantage In Anticipating Asean Economic Community (AEC) 2015 | |||||||||||
| Page(s): | 18-23 | ||||||||||
| Author | Siti Nurhasanah, Riza Listiana Sudrajat, Yulya Srinovita, Elis Trisnawati | ||||||||||
|
|||||||||||
| Efficiency Analysis of Garment Manufacturing: In-House Manufacturing Versus Outsourcing | |||||||||||
| Page(s): | 5-10 | ||||||||||
| Author | Chiang Kao | ||||||||||
|
|||||||||||
| Ftir Characterisation and Strength Performance of Degradable Additive Incorporated Polyethylene Terephthelate (PET) Bottle Upon Exposure to Different Environment | |||||||||||
| Page(s): | 51-55 | ||||||||||
| Author | Rahmah Mohamed, Mohd Muizz Fahimi, Fatin Afiqah Juhari, Ahmad Mawardi Rahmat, Siti Aishah Mohd Isa | ||||||||||
|
|||||||||||
| Development Of Human-Robot Collaborationwith Collectiveintelligencefor Cyber-Physical System | |||||||||||
| Page(s): | 28-32 | ||||||||||
| Author | Chung-Chi Huang, Sheng-Hsien Tang, Hsin-Pulin, Cheng-Chitsai | ||||||||||
|
|||||||||||
| High Strength, Weight Reduction, Range Increase, Fuel Saving; New Generation Material For Air Industy; Graphene | |||||||||||
| Page(s): | 25-27 | ||||||||||
| Author | Ahmet Zafer Saglik | ||||||||||
|
|||||||||||
| Mechanical Propertied Of The Prosthesis Limp From Pvc Glass Fiber Sandwich | |||||||||||
| Page(s): | 35-39 | ||||||||||
| Author | Akram. H. M. Ali, muhab. S.shlaby, elawad. F. Elfaki | ||||||||||
|
|||||||||||
| Innovativeness Of Enterprisesaccording To Its Size And Economic Activity: Croatian Case Study | |||||||||||
| Page(s): | 8-13 | ||||||||||
| Author | Mirjana Jelecraguz, Kristian Dokic, Bojanradisic, Elizabetakrizanec | ||||||||||
|
|||||||||||
| Study Of CTS Caused By Vibration Exposure On The Workers Engaged In Manufacturing Sector | |||||||||||
| Page(s): | 53-59 | ||||||||||
| Author | Pankaj Sharma | ||||||||||
|
|||||||||||
| An Application of Experimental Design for Defect Reduction in Weaving Process | |||||||||||
| Page(s): | 20-24 | ||||||||||
| Author | Chansiri Singhtaun, Patin Imkrajang | ||||||||||
|
|||||||||||
| Woven Diversification In Order to Strengthen the Export of Goyor Sarung Based on OVOP (One Village One Product) in Sragen Indonesia | |||||||||||
| Page(s): | 5-10 | ||||||||||
| Author | Rahmawati, Soenarto, Wahyu Agustiningsih., Dyah Sawitri | ||||||||||
|
|||||||||||
| Analysis Of Economic Sector Base In Gorontalo-Indonesia | |||||||||||
| Page(s): | 55-58 | ||||||||||
| Author | Meimoon Ibrahim | ||||||||||
|
|||||||||||
| The Mechanical Properties Of Rubberwood Particleboards Bonded With Different Resin Type At Different Loaded Density | |||||||||||
| Page(s): | 35-37 | ||||||||||
| Author | Bibi Amirah Zayani Ahmade, Mansur Ahmad, Falah Abu | ||||||||||
|
|||||||||||
| Physical Properties Of Cassava (Manihot Esculenta) Stem From Different Sections | |||||||||||
| Page(s): | 31-34 | ||||||||||
| Author | Nur ‘Izzati Ismail, Norhayati Hamzah, Kamarulzaman Nordin | ||||||||||
|
|||||||||||
| Woven Hemp Fabric Reinforced Vinyl Ester Composite: Effect Of Water Absorption On The Mechanical Properties Degradation | |||||||||||
| Page(s): | 19-24 | ||||||||||
| Author | Mohd Iqbal Misnon, Md Mainul Islam, Jayantha Ananda Epaarachchi, Hao Wang, Kin-Tak Lau | ||||||||||
|
|||||||||||
| Coherence of Risk and Cost in Global Production Networks | |||||||||||
| Page(s): | 1-7 | ||||||||||
| Author | Christina Reuter, Jan-Philipp Prote, Carsten Witthohn, Katrin Hirschfelder | ||||||||||
|
|||||||||||
| The Impact on Food And Beverage Firm Performance: The Relationship Among Entrepreneurial Orientation, Customer Relationship Management and Service Innovation | |||||||||||
| Page(s): | 37-43 | ||||||||||
| Author | Jun-Zhi Chiu, Hui-Yu Chang | ||||||||||
|
|||||||||||
| Software Engineering Applications in Science and Industry | |||||||||||
| Page(s): | 29-31 | ||||||||||
| Author | Farzaneh Nematollahi | ||||||||||
|
|||||||||||
| Enhancing The Ability of Agriculture Practitioners of Government Sectors in Order to Support Thai Farmers Based on The ‘Self-Reliant’ Concept | |||||||||||
| Page(s): | 11-13 | ||||||||||
| Author | Wandee Suthinarakorn | ||||||||||
|
|||||||||||
| Lean Management Practices At Local Government: An Application For Osmangazi Municipality/Bursa/Turkey (Management Science) | |||||||||||
| Page(s): | 5-7 | ||||||||||
| Author | Hasine Cetin, Fatma Sert Eteman, H.Kemal Sezen | ||||||||||
|
|||||||||||
| Design of Rail Communication System as Two-Objective Discrete Static Optimization Problem | |||||||||||
| Page(s): | 54-58 | ||||||||||
| Author | Adam Galuszka, Jolanta Krystek, Andrzej Swierniak, Tomasz Hejczyk | ||||||||||
|
|||||||||||
| New Product Development and Innovation Approaches: An Exploratory Study in Sri Lankan Apparel Manufacturing Organizations | |||||||||||
| Page(s): | 23-28 | ||||||||||
| Author | Jayamali De Silva, Thashika D. Rupasinghe | ||||||||||
|
|||||||||||
| Effective Decision and Bankruptcy Prediction Risk | |||||||||||
| Page(s): | 59-65 | ||||||||||
| Author | Maryam Khalili Araghi, Sara Makvandi | ||||||||||
|
|||||||||||
| Buyer-Supplier Relationship in the Food Industry | |||||||||||
| Page(s): | 1-4 | ||||||||||
| Author | Amy H. I. Lee, He-Yau Kang | ||||||||||
|
|||||||||||
| Real-Time Dispatching System of Giga-FAB | |||||||||||
| Page(s): | 15-19 | ||||||||||
| Author | Ying-Mei Tu | ||||||||||
|
|||||||||||
| Desorption Study of a Fungal Natural Isolate of Aspergillus Sp. in Decolorization of Biomethanated Effluent | |||||||||||
| Page(s): | 23-26 | ||||||||||
| Author | Snehal Agnihotri | ||||||||||
|
|||||||||||
| Implementations of Collaborative Knowledge Creation and The Quadruple Helix Concept in Teaching Factory and Production Based Education | |||||||||||
| Page(s): | 18-21 | ||||||||||
| Author | Iis Mariam, Nining Latianingsih, Eva Zulfa Nailufar | ||||||||||
|
|||||||||||
| China’s Labor-Intensive Factories Transplantation: New Opportunities for Sub-Saharan Africa Catch-Up | |||||||||||
| Page(s): | 5-14 | ||||||||||
| Author | Ehizuelen Michael Mitchell Omoruyi | ||||||||||
|
|||||||||||
| Natural Radioactivity Level And The Risks Arising From The Consumption of Household Cooking Utensils in Saudi Arabia | |||||||||||
| Page(s): | 7 | ||||||||||
| Author | Alharbi W.R | ||||||||||
|
|||||||||||
| Industrial Buildings Design Guideline Between Sustainability Principles and Lean Manufacture | |||||||||||
| Page(s): | 8-16 | ||||||||||
| Author | Mohamed Sherief El-Dakkak, Tarek Farghali, Mohamed Assem Hanafi | ||||||||||
|
|||||||||||
| Preventing and Detecting Fraud Risksat The Business Processes Level | |||||||||||
| Page(s): | 24-28 | ||||||||||
| Author | Salah D. Alshehri, Khaled Alghathbar, Ahmad Alturki | ||||||||||
|
|||||||||||
| Cost Reduction Through Waste Management in Auto Parts Industry: A Case Study | |||||||||||
| Page(s): | 17-22 | ||||||||||
| Author | Gurinder Singh Brar, Abhishek Thakur | ||||||||||
|
|||||||||||
| Cost Reduction Using Value Analysis For Auto Rickshaw Steering Bar | |||||||||||
| Page(s): | 30-36 | ||||||||||
| Author | Aprinder Singh Sandhu, Kusaldeep Singh Sekhon | ||||||||||
|
|||||||||||
| The Effects of Total Quality Management on The Employee Performance in Malaysian Manufacturing Industry | |||||||||||
| Page(s): | 1-6 | ||||||||||
| Author | Mohd Khairulnizam Zahari, Norhayati Zakuan | ||||||||||
|
|||||||||||
| Strategic Planning, Constraints, Effects and Implications For Manufacturing Companies in Africa | |||||||||||
| Page(s): | 1-2 | ||||||||||
| Author | Benjamin C. Amaike, Ben. U. A | ||||||||||
|
|||||||||||
| Determinant of Corporate Governance, Audit Quality and Financing Decision | |||||||||||
| Page(s): | 1-7 | ||||||||||
| Author | Nengzih | ||||||||||
|
|||||||||||
| The Effect of Sales Growth Ratio, Inventory Turn Over Ratio, Growth Opportunity to Company’s Profitability (Survey in Indonesia’s Stocks Exchange) | |||||||||||
| Page(s): | 8-16 | ||||||||||
| Author | Ratna Mappanyuki, Meipita Sari | ||||||||||
|
|||||||||||
| Design and Fabrication of a Self-Adjusted Mechanism in Combination With Passive Peeling For Effective Separation Used in Digital Light Processing (DLP) 3D Printing | |||||||||||
| Page(s): | 43-47 | ||||||||||
| Author | Lin, Y.S., Yang, C.J. | ||||||||||
|
|||||||||||
| Logistical Success Factors of Philippine Pharmaceutical Industry: A Strategic Business Process Innovation | |||||||||||
| Page(s): | 53-61 | ||||||||||
| Author | Daisy H. Estrada | ||||||||||
|
|||||||||||
| A Study on E-Oriented Enterprise Manufacturing Execution System Based on Rfid and Internet | |||||||||||
| Page(s): | 1-7 | ||||||||||
| Author | Yu-Chi Wu, Wen-Ching Yu | ||||||||||
|
|||||||||||
| Determinant of Corporate Governance, Audit Quality and Financing Decision | |||||||||||
| Page(s): | 1-7 | ||||||||||
| Author | Nengzih | ||||||||||
|
|||||||||||
| The Effect of Sales Growth Ratio, Inventory Turn Over Ratio, Growth Opportunity to Company’s Profitability (Survey in Indonesia’s Stocks Exchange) | |||||||||||
| Page(s): | 8-16 | ||||||||||
| Author | Ratna Mappanyuki, Meipita Sari | ||||||||||
|
|||||||||||
| Design and Fabrication of a Self-Adjusted Mechanism in Combination With Passive Peeling For Effective Separation Used in Digital Light Processing (DLP) 3D Printing | |||||||||||
| Page(s): | 43-47 | ||||||||||
| Author | Lin, Y.S., Yang, C.J. | ||||||||||
|
|||||||||||
| Knowledge Management: To Study The Impact of Knowledge Capability on Operations Strategy | |||||||||||
| Page(s): | 1-7 | ||||||||||
| Author | Sana Tariq Butt | ||||||||||
|
|||||||||||
| A Framework For The Classification And Identification of The Four Km Strategies | |||||||||||
| Page(s): | 1-5 | ||||||||||
| Author | Jong-Min Choe | ||||||||||
|
|||||||||||
| Bim-Based Structural Performance Assessment of Individual Modules in Modular Building Design | |||||||||||
| Page(s): | 1 | ||||||||||
| Author | Mojtaba Valinejadshoubi, Ashutosh Bagchi | ||||||||||
|
|||||||||||
| Quality Control and Quality Assurance Effect in The Manufacturing Industries on The Environmental Development | |||||||||||
| Page(s): | 1-7 | ||||||||||
| Author | Oba Abimbola Aina-David, Ayoola Quadri Adeyomi, Taiwo Abayomi Gbenga | ||||||||||
|
|||||||||||
| Solar Water Pumps For Agriculture | |||||||||||
| Page(s): | 4-8 | ||||||||||
| Author | Chonmapat Torasa, Nichanant Sersri | ||||||||||
|
|||||||||||
| Problems Within Printing Business Operations In Thailand | |||||||||||
| Page(s): | 79-81 | ||||||||||
| Author | Apinya Mungaomklang | ||||||||||
|
|||||||||||
| An Analysis of The Location of Plastic Industry in Thailand | |||||||||||
| Page(s): | 19-22 | ||||||||||
| Author | Musthaya Patchanee | ||||||||||
|
|||||||||||
| Competitive Advantage Strategy and Successful Business Operation Model of Manufacturing in Chachoengsao Province | |||||||||||
| Page(s): | 9-14 | ||||||||||
| Author | Sutthathip Kamthornphiphatthanakul, Thanadech Kangsawat, Saranya Noibuatip | ||||||||||
|
|||||||||||
| The Study on The Characteristics of Pure Bamboo Strips | |||||||||||
| Page(s): | 10-15 | ||||||||||
| Author | Paramananthan Balakrishnan, Thandayuthapani Seperamaniam, Kannan Rassiah | ||||||||||
|
|||||||||||
| Carbon Fibre Reinforced Wheel For Ultra Efficient Vehicle | |||||||||||
| Page(s): | 1-8 | ||||||||||
| Author | B. Jakubczak, A. Markiewicz, M. Bystrzejewski, M. Demeszko, B. Bubas | ||||||||||
|
|||||||||||
| The Undesirable Effects of Marvdasht Sugar Factory in The Quality of Groundwater And Environment | |||||||||||
| Page(s): | 30-36 | ||||||||||
| Author | Reza Dabbaghi | ||||||||||
|
|||||||||||
| CSR and Organizational Commitment: A Meta-Analysis | |||||||||||
| Page(s): | 8-14 | ||||||||||
| Author | Priyanka Aggarwal, Reetesh Kumar Singh | ||||||||||
|
|||||||||||
| Design And Contact Stress Analysis Of Helical Gear For Light-Weight Car | |||||||||||
| Page(s): | 96-101 | ||||||||||
| Author | Hlwan Htet Htet San, Htay Htay Win, Myint Thein | ||||||||||
|
|||||||||||
| An Investigation On The Export Barriers Faced By Smes In Sri Lanka: With Special Reference To Manufacturing Sector | |||||||||||
| Page(s): | 131 | ||||||||||
| Author | Wijayarathne J.M.D.S. | ||||||||||
|
|||||||||||
| Continuous Biodiesel Production From Waste Cooking Oil Using Homogeneous Catalyst With Microwave Heating | |||||||||||
| Page(s): | 137-140 | ||||||||||
| Author | Tinnabhop Santadkha, Malee Santikunaporn | ||||||||||
|
|||||||||||
| A Hybrid Fuzzy Ahp- Electre Approach To Rank Lean Sixsigma Solutions: Case Experience Of A Manufacturing Organisation | |||||||||||
| Page(s): | 7-11 | ||||||||||
| Author | Gunjanyadav, Tushar N Desai | ||||||||||
|
|||||||||||
| Development Of A Vision System For A M-1ia Robot | |||||||||||
| Page(s): | 28-33 | ||||||||||
| Author | James Spittal, Igor A Gorlach | ||||||||||
|
|||||||||||
| Enhancing Dependabilities of Smart Units In Industry 4.0 Contexts: A Multiagent System Approach | |||||||||||
| Page(s): | 6-12 | ||||||||||
| Author | Hermann Kuhnle, Hessamedin Bayanifar | ||||||||||
|
|||||||||||
| Measurement Of The Economic Benefits Of Information Systems / Information Technology In Small And Medium Industries | |||||||||||
| Page(s): | 16-19 | ||||||||||
| Author | Prihanto Ngesti Basuki, Frederik Samuel Papilaya, Agustinus Fritz Wijaya | ||||||||||
|
|||||||||||
| Application of the Lean Manufacturing System for The Solution of Production Planning Problems: Toyota Motor Manufacturing Turkey | |||||||||||
| Page(s): | 41-46 | ||||||||||
| Author | Seher Arslankaya, Vildan Ă–z | ||||||||||
|
|||||||||||
| Application of Building Information Modeling in The Modular Building Construction | |||||||||||
| Page(s): | 1 | ||||||||||
| Author | Mojtaba Valinejadshoubi, Ashutosh Bagchi, Azin Shakibabarough | ||||||||||
|
|||||||||||
| PID Controller Design For Vibratory Milling | |||||||||||
| Page(s): | 9-12 | ||||||||||
| Author | Wael Naji Alharbi, Andre Batako, Barry Gomm | ||||||||||
|
|||||||||||
| Analysis of Space Harmonics in Shaded Pole Induction Motor By Discrete Hartley Transform | |||||||||||
| Page(s): | 1-4 | ||||||||||
| Author | Adem Dalcali, Mehmet Akbaba | ||||||||||
|
|||||||||||
| Further Inquiries on Growth and Failure of Small Tourism Firm in Malaysia | |||||||||||
| Page(s): | 7-12 | ||||||||||
| Author | Muhammad Hakimi Mohd Hussain, Hairul Nizam Ismail | ||||||||||
|
|||||||||||
| Software Engineering Applications in Science and Industry | |||||||||||
| Page(s): | 16-18 | ||||||||||
| Author | Doostani Ali | ||||||||||
|
|||||||||||
| Public And Private Sectors In Chile: Good Economic Performance And Social Unrest (2000-2015) | |||||||||||
| Page(s): | 5-8 | ||||||||||
| Author | Enrique Vasquez | ||||||||||
|
|||||||||||
| Study On The Microstructures And Brazing Conditions Of Titanium Alloys | |||||||||||
| Page(s): | 15-18 | ||||||||||
| Author | Taeshin Chung | ||||||||||
|
|||||||||||
| Study on the Microstructures and Brazing Conditions of Titanium Alloys | |||||||||||
| Page(s): | 15-18 | ||||||||||
| Author | Taeshin Chung | ||||||||||
|
|||||||||||
| The Level of Importance of The Quality Factors of Working Life of Employees in Business and Manufacturing in Thailand | |||||||||||
| Page(s): | 13-18 | ||||||||||
| Author | Kanokwalee Kongsong, Taksaya Sangayotin | ||||||||||
|
|||||||||||
| The Sectoral Employment Intensity of Growth in South Africa | |||||||||||
| Page(s): | 1 | ||||||||||
| Author | Njabulo Mkhize | ||||||||||
|
|||||||||||
| A Study on Fundamental Problems for The Exportation of Metal Furniture Industry in The Customs Tariff System Harmonized Index | |||||||||||
| Page(s): | 6-9 | ||||||||||
| Author | Thepnarintra Praphanphat | ||||||||||
|
|||||||||||
| Research On The Development Situation Of Green Industrial Building In Shanghai | |||||||||||
| Page(s): | 22-26 | ||||||||||
| Author | Zhang Yinqi, Wang He, Gao Weijun, Ying Xiaoyu | ||||||||||
|
|||||||||||
| Succession, Familiness And Innovation In Family Firms: Evidence From Taiwan's Small- And Medium-Sized Manufacturing Firms | |||||||||||
| Page(s): | 5-11 | ||||||||||
| Author | Mei-Chen Hsieh, Ting-Ling Lin | ||||||||||
|
|||||||||||
| Effect of Nanocomposite Powders on The Strength of Joints Bonded With Epoxy Adhesive Included Varied Proportions | |||||||||||
| Page(s): | 11-15 | ||||||||||
| Author | Ismail Saraç, Şemsettin Temiz | ||||||||||
|
|||||||||||
| Effect of Scanning Speed on The Material Characterizations of Laser Deposited Titanium Alloy and Copper | |||||||||||
| Page(s): | 9-12 | ||||||||||
| Author | Mutiu f. Erinosho, Esther t. Akinlabi, Oluwagbenga johnson, Gbadebo owolabi | ||||||||||
|
|||||||||||
| Influence of Laser Scanning Speed on The Rotary Wear Behaviour of Deposited Ti6al4v Alloy and Cu | |||||||||||
| Page(s): | 13-16 | ||||||||||
| Author | Mutiu f. Erinosho, Esther t. Akinlabi1, Mukunap. Mubiayi1, Gbadebo owolabi | ||||||||||
|
|||||||||||
| Real-Cargo Information Tracking Technology (RCI), Perceived Value and Intention to use | |||||||||||
| Page(s): | 1-8 | ||||||||||
| Author | Andrew Peng, Stephen Wang | ||||||||||
|
|||||||||||
| Optimization of Uniport Paint Product Mix | |||||||||||
| Page(s): | 1-5 | ||||||||||
| Author | Ngwu Kingsley Nnabueze | ||||||||||
|
|||||||||||
| Identification The Critical Lean Wastes In Food Company Using Ranking Method For Better Lean Tools Selection | |||||||||||
| Page(s): | 52-56 | ||||||||||
| Author | Yunos Ngadiman, Abdul Talib Bon, David Martin Juanil, Burairah Hussin, Izaidin Abdul Majid, Tee Yih Jye | ||||||||||
|
|||||||||||
| A Fuzzy Logic Approach to The Settlement of The Problems Arising in The Just-In-Time Production System: A Case Study of Toyota | |||||||||||
| Page(s): | 1-6 | ||||||||||
| Author | Tülay Korkusuz Polat, Büşra Çakir | ||||||||||
|
|||||||||||
| Reliability Analysis of Dumper in Lime Stone Mine Based on Weibull Distribution | |||||||||||
| Page(s): | 6-10 | ||||||||||
| Author | Harish kumar n s, R. P. Choudhary, Ch. S. N. Murthy | ||||||||||
|
|||||||||||
| A Structural Equation Model of Collaboration and Innovation Affecting Organization Performance in Thailand’s Automotive Parts Inductry : A Conceptual Perspective | |||||||||||
| Page(s): | 10-14 | ||||||||||
| Author | Winit Sueptaetrakun, Sorasak Tangthong | ||||||||||
|
|||||||||||
| Linkage of Learning Organization and Innovation That Affects Organnization Performance in The Automotive Parts Industry in Thailand | |||||||||||
| Page(s): | 15-20 | ||||||||||
| Author | Winit Sueptaetrakun, Sorasak Tangthong | ||||||||||
|
|||||||||||
| Tensile Strength of PLA Parts Produced by FDM 3D Printer | |||||||||||
| Page(s): | 8-13 | ||||||||||
| Author | Juraj Beniak, Peter Krizan, Milos Matus | ||||||||||
|
|||||||||||
| Tribological Behaviour of Cocrmo Samples Additively Manufactured With Electron Beam Melting Process | |||||||||||
| Page(s): | 1 | ||||||||||
| Author | Wei Quan Toh, Xipeng Tan, Erjia Liu, Shu Beng Tor | ||||||||||
|
|||||||||||
| Anapplication Genetic Algorithms For Dynamic Order Volume With Randomly And Inconsecutively Demands | |||||||||||
| Page(s): | 1-6 | ||||||||||
| Author | Adisak Nowneow, Vichairungreunganun | ||||||||||
|
|||||||||||
| Sensitivity Analysis and Greedy Heuristic Approach to Transshipment Model in Outbound System | |||||||||||
| Page(s): | 46-51 | ||||||||||
| Author | Modestus o. Okwu, T.c. Nwoha, Oluwole omotoso, Adedoyin adesuji | ||||||||||
|
|||||||||||
| Finite Element Analysis of Plastic Cups | |||||||||||
| Page(s): | 92-94 | ||||||||||
| Author | Jessupa Sarakhun, Sombat Tamna, Ek-U Thammakornbunjut | ||||||||||
|
|||||||||||
| The Classification of Types of Km Strategy | |||||||||||
| Page(s): | 1-4 | ||||||||||
| Author | Jong-Min Choe | ||||||||||
|
|||||||||||
| Microstructural Characterization and Hardness Properties of Magnesium Alloy Processed by High Pressure Torsion | |||||||||||
| Page(s): | 15-17 | ||||||||||
| Author | Kazeem O. Sanusi, Madushele Nkosinathi, Esther T. Akinlabi | ||||||||||
|
|||||||||||
| An Analysis of Human Resource Management (HRM) Practices in Bangladesh Ready-Made Garments Sector | |||||||||||
| Page(s): | 14-20 | ||||||||||
| Author | Farhanarashid, Cheazlantaib | ||||||||||
|
|||||||||||
| Managing E-Waste – Issues and Challenges | |||||||||||
| Page(s): | 7-12 | ||||||||||
| Author | T.Felixkala, D.B.Jabaraj, J.F.Jesvan Raj | ||||||||||
|
|||||||||||
| Developing E-leadership skills in Digital Era | |||||||||||
| Page(s): | 6-10 | ||||||||||
| Author | Cyousef Madi | ||||||||||
|
|||||||||||
| Flexural And Impact Characterization Of UV Treated Areca Fiber Polypropylene Composites | |||||||||||
| Page(s): | 16-20 | ||||||||||
| Author | Raghuveer H. Desai, L. Krishnamurthy, T.N. Shridhar | ||||||||||
|
|||||||||||
| Granulation and Atomization Process for Production of Metal Granules and Powders | |||||||||||
| Page(s): | 5-9 | ||||||||||
| Author | Ankit Bairwa, Ashok Kumar Reddy, Gurmeet Singh, Vijay Kumar Sharma | ||||||||||
|
|||||||||||
| The Structure And Durability Of Assembled Nozzleplates For Steam Turbines | |||||||||||
| Page(s): | 6-9 | ||||||||||
| Author | Jong Yun Jung, Joon-Seob Kim, Heesung Park | ||||||||||
|
|||||||||||
| Ultra-High Precision Machining of Optical Mould Inserts | |||||||||||
| Page(s): | 10 | ||||||||||
| Author | K. Abou-El-Hossein | ||||||||||
|
|||||||||||
| High Resolution Drop-on-Demand Based Electrohydrodynamic Printing of Conductive Silver Micro Patterns | |||||||||||
| Page(s): | 36-39 | ||||||||||
| Author | Memoon Sajid, Soo Wan Kim, Jae Wook Lee, Kyung Hyun Choi, Yang Hoi Doh | ||||||||||
|
|||||||||||
| Design Of JAMU Beverages In Bottle Ready-To-Drink Through Sustainable Manufacturing With Kansei Engineering | |||||||||||
| Page(s): | 57-60 | ||||||||||
| Author | Sasmita Rahma Kusuma, Nisa Mafazati Ahsani, Hardiyanti Budiman | ||||||||||
|
|||||||||||
| Accounting Information Systems Implementation and Competitive Advantage in Thai-Food Manufacturing Firms | |||||||||||
| Page(s): | 50-57 | ||||||||||
| Author | Patcharin Bunnoon, Suppakorn Keawlaied | ||||||||||
|
|||||||||||
| Design Of Mangosteen Fruit Pulper Machine As An Innovative Solution To Increase The Value-Added Of Manggosteen | |||||||||||
| Page(s): | 51-53 | ||||||||||
| Author | Rosyid Ridho, Wawan Hermawan, Usman Ahmad | ||||||||||
|
|||||||||||
| Gyroscopic Effects On Vibratory Responses Of Nonlinear Misaligned Rotor Systems | |||||||||||
| Page(s): | 62-65 | ||||||||||
| Author | Liming Dai, Deep Patel | ||||||||||
|
|||||||||||
| Foreign Direct Investments and Technology Relationship | |||||||||||
| Page(s): | 15-20 | ||||||||||
| Author | Selim Corekcioglu, Molnár Márk | ||||||||||
|
|||||||||||
| Knowledge Management Processes and Workforce Agility: A Theoretical Perspective | |||||||||||
| Page(s): | 25-30 | ||||||||||
| Author | Soud Almahamid | ||||||||||
|
|||||||||||
| The Impact of South Africa’s Exchange Rate on Sectoral Exports | |||||||||||
| Page(s): | 15-19 | ||||||||||
| Author | Andre C Jordaan, Ndivhuho Netshitenzhe | ||||||||||
|
|||||||||||
| For Improvement Of Manufacturing Software Units Reuse | |||||||||||
| Page(s): | 81-84 | ||||||||||
| Author | H. Basson, M. Bouneffa, M. Matsuda, A. Ahmad, D. Chung, E. Arai | ||||||||||
|
|||||||||||
| Using Finite Element Simulation To Optimize Thermoplastic Bio-Composites Process Parameters | |||||||||||
| Page(s): | 1-3 | ||||||||||
| Author | Nawar Kadi, Behnaz Baghaei, Mikael Skrifvars | ||||||||||
|
|||||||||||
| How to Reduce Waste in Food Manufacturing | |||||||||||
| Page(s): | 12-14 | ||||||||||
| Author | Alaauldeen Ahmed Osman Ahmed Ibrahim | ||||||||||
|
|||||||||||
| Statistical Process Control Implimentation For Process Optimization and Better Quality | |||||||||||
| Page(s): | 14-17 | ||||||||||
| Author | Vaibhav Sonje, S.B. Thorat, S.R. Pande, Girish Katkar | ||||||||||
|
|||||||||||
| Strategic Alliances and Performance of Food and Beverage Manufacturing Companies in Kenya | |||||||||||
| Page(s): | 1-5 | ||||||||||
| Author | Dominic C. Muteshi, Ann Kariuki, Kellen Kiambati | ||||||||||
|
|||||||||||
| The Structural Analysis of The Manufacturing Industry of Electrical Equipment Products | |||||||||||
| Page(s): | 1-6 | ||||||||||
| Author | Aytekin Altiparmak, Ayhan KuloÄźlu | ||||||||||
|
|||||||||||
| Investigating The Potential of Hybrid Hot Forging Processes With Regard to The Forming and Joining of Sheets and Massive Elements | |||||||||||
| Page(s): | 1-6 | ||||||||||
| Author | Sara Mohammadifard, Malte Stonis, Jan Langner, Bernd-Arno Behrens | ||||||||||
|
|||||||||||
| Segmentation and Marketing Strategies Targeting Women’s Jeans in Urban and Rural Market in India | |||||||||||
| Page(s): | 22 | ||||||||||
| Author | Rishabh A. Chandak | ||||||||||
|
|||||||||||
| Modeling and Optimization of Grinding of Ceramics using Hybrid Artificial Neural Network and Genetic Algorithm Approach | |||||||||||
| Page(s): | 71-75 | ||||||||||
| Author | Pankaj Kumar Shriwastava, Prakhar Prakash Dwivedy, Kanhaiyaji Tripathi | ||||||||||
|
|||||||||||
| One Optimal Control Transition-Based Deadlock Recovery Policy For Asymmetric Flexible Manufacturing Systems | |||||||||||
| Page(s): | 03-05 | ||||||||||
| Author | Yen-Liang.Pan, Chun-Wang.Tai, Ter-Chan.Row, Ching-Hsiang.Lee | ||||||||||
|
|||||||||||
| Obstacles to West Bank Industrial Development Caused by the Palestinian Lack of Control Over its External and Internal Borders | |||||||||||
| Page(s): | 5-11 | ||||||||||
| Author | Flávio Nunes, Loai Aburaida | ||||||||||
|
|||||||||||
| Garment Productivity Improvement: Implementing Lean Manufacturing Tool As A Strategy for Improvement | |||||||||||
| Page(s): | 7-12 | ||||||||||
| Author | Shams Tabrin, Mamun Hossain | ||||||||||
|
|||||||||||
| Research System For Basic Structure | |||||||||||
| Page(s): | 81-84 | ||||||||||
| Author | Paranee Srikaew, Darika Aiatluan | ||||||||||
|
|||||||||||
| TQM Practices in Automobile Industry of Northern India - An Empirical Investigation | |||||||||||
| Page(s): | 41-45 | ||||||||||
| Author | Gurwant Singh Gill, Aprinder Singh Sandhu, Jagdeep Singh | ||||||||||
|
|||||||||||
| Challenges and Opportunities in CSR in Indian Textile Smes | |||||||||||
| Page(s): | 1 | ||||||||||
| Author | Kareena Gandhi | ||||||||||
|
|||||||||||
| Effect of Libr Concentration on The Structure and Performance of PVDF Membrane | |||||||||||
| Page(s): | 3 | ||||||||||
| Author | Yash Madhani, Poojan Kothari, Chayan Jani, Bharti Saini | ||||||||||
|
|||||||||||
| Chemical Industry And Its Applications | |||||||||||
| Page(s): | 5-7 | ||||||||||
| Author | Ali Moeinpour, Zahra Sayyahmeimandi | ||||||||||
|
|||||||||||
| Scaffold Fabrication Using 3D Printing | |||||||||||
| Page(s): | 14-18 | ||||||||||
| Author | N H Tran, D V Thinh, X L Trinh, H M Hoang, H C Kim | ||||||||||
|
|||||||||||
| Investigation On The Use Of Power Ultrasonic To Improve The Laser Welding Of Aluminium Alloys | |||||||||||
| Page(s): | 1-4 | ||||||||||
| Author | Ahmed Teyeb, Premesh S. Lowe, Jamil Kanfoud, Tat-Hean Gan | ||||||||||
|
|||||||||||
| Knowledge Management Capability, Trust, and Performance of Manufacturing Companies in Emerging Economies | |||||||||||
| Page(s): | 1-9 | ||||||||||
| Author | Saad Alaaraj | ||||||||||
|
|||||||||||
| Influence of Tool Wear on The Cutting Forces in High Speed Green Milling of Titanium Alloys | |||||||||||
| Page(s): | 42-46 | ||||||||||
| Author | Habiballah Safari, Safian Sharif | ||||||||||
|
|||||||||||
| Structural Safety of Rotor Discs for Steam Turbines | |||||||||||
| Page(s): | 32 | ||||||||||
| Author | Jong Yun Jung, Joon-Seob Kim | ||||||||||
|
|||||||||||
| Proactive Vs Reactive Environmental Strategies: A Study of their Motives and Performance Implications in China | |||||||||||
| Page(s): | 18-20 | ||||||||||
| Author | Ricky Y. K. Chan | ||||||||||
|
|||||||||||
| Business Strategy For Formula Toothpaste To Achieve Sustainable Competitive Advantage | |||||||||||
| Page(s): | 1-9 | ||||||||||
| Author | Juni Karlinaand, Satya Aditya Wibowo | ||||||||||
|
|||||||||||
| Application Of Artificial Neural Network For Defect Prediction In Ceramic Tiles Manufacturing | |||||||||||
| Page(s): | 51-54 | ||||||||||
| Author | Mohammed T. Hayajneh | ||||||||||
|
|||||||||||
| An Empirical Study On Global Development Mode Of Small And Medium Manufacturing Companies | |||||||||||
| Page(s): | 1-7 | ||||||||||
| Author | Cheng-Hua Wang, Wen-Ya Tsai | ||||||||||
|
|||||||||||
| Influence Of Various Nano-Sized Tio2 Particles On The Mechanical Properties Of Aluminium Composites Synthesised By Stir Casting Method | |||||||||||
| Page(s): | 13-18 | ||||||||||
| Author | H M Nanjundaswamy, Raghu S, M Sreenivasa | ||||||||||
|
|||||||||||
| Engineering Education: Skill Levels and Outcome-based Approach | |||||||||||
| Page(s): | 8-12 | ||||||||||
| Author | Sayyad Zahid Qamar | ||||||||||
|
|||||||||||
| Design and CFD Simulation to Improvement of Solar Chimney Efficiency to Generate Power in Desert Areas | |||||||||||
| Page(s): | 30-34 | ||||||||||
| Author | Yahya Rabbani, Mansor Shirvani, Omid Tavakoli, Nima Hajnajaf, Rohollah Ghorbani | ||||||||||
|
|||||||||||
| Driving Control For Unmanned Driving Vehicle System In Factory | |||||||||||
| Page(s): | 2-8 | ||||||||||
| Author | Yen-Hui Kuo, Shu-Hui Lin, Eric Hsiao-Kuang Wu | ||||||||||
|
|||||||||||
| Evaluation of No2 in Ambient Air in Industrial Area of Sungai Buloh By Using Passive Sampling Method | |||||||||||
| Page(s): | 1-7 | ||||||||||
| Author | Tharaniya S Nair Suthesan, Shamsul Izhar, Chikayoshi Yamada | ||||||||||
|
|||||||||||
| Fabrication Of A Novel Xanthine Biosensor Based On Enzyme Modified Glassy Carbon Electrode For Fish Freshness Detection | |||||||||||
| Page(s): | 58 | ||||||||||
| Author | Ali Benvidi, Samira Yazdanparast, Salehehabbasi, Masoudrezaeinasab | ||||||||||
|
|||||||||||
| Collaborative Robots in Manufacturing Applications Safety and Ergonomic Approach | |||||||||||
| Page(s): | 50-55 | ||||||||||
| Author | Joyce Silva, Stefano Seriani | ||||||||||
|
|||||||||||
| TQM Practices in Automobile Industry of Northern India-An Empirical Investigation | |||||||||||
| Page(s): | 26-30 | ||||||||||
| Author | Gurwant Singh Gill, Aprinder Singh Sandhu , Jagdeep Singh | ||||||||||
|
|||||||||||
| Image Based Automatic Defect Inspection of Substrate, Die Attach and Wire Bond in IC Package Process | |||||||||||
| Page(s): | 8-14 | ||||||||||
| Author | Yung-Kuan Chan, Cheng-Siang Jhang, Yi-Chen Lin | ||||||||||
|
|||||||||||
| Internal Surface Modification Of Additively Manufactured Components Using Hydrodynamic Cavitation And Abrasive Particles | |||||||||||
| Page(s): | 60-64 | ||||||||||
| Author | Arun Prasanth Nagalingam, S. H. Yeo | ||||||||||
|
|||||||||||
| Selling Services in the Manufacturing Industry | |||||||||||
| Page(s): | 9-11 | ||||||||||
| Author | Towako Sakama | ||||||||||
|
|||||||||||
| The Role Investment, Growth, Size to Company Performance: Evidence in Indonesia | |||||||||||
| Page(s): | 5-12 | ||||||||||
| Author | Imam Ghozali, Eka Handriani, Hersugondo Hersugondo | ||||||||||
|
|||||||||||
| TQM Practices in Automobile Industry of India - An Empirical Investigation | |||||||||||
| Page(s): | 27-29 | ||||||||||
| Author | Sivaraj Singaravelu, Anoop Mattuvayil | ||||||||||
|
|||||||||||
| Retail and Customer Profile Analysis and Visualization using Data Mining Techniques | |||||||||||
| Page(s): | 54-60 | ||||||||||
| Author | Juliet V. Menor | ||||||||||
|
|||||||||||
| Perception of Industry 4.0 on the Internet | |||||||||||
| Page(s): | 28-31 | ||||||||||
| Author | Jan Krejci | ||||||||||
|
|||||||||||
| Justification for Developing A Bachelor of Manufacturing Technology Program | |||||||||||
| Page(s): | 1-4 | ||||||||||
| Author | Jay Albayyari, Carol Jones, Chuck Cimpaglio, Stephen Jacquemin | ||||||||||
|
|||||||||||
| Defect Classification of Reclaim Wafer By Deep Learning | |||||||||||
| Page(s): | 4-8 | ||||||||||
| Author | Fang-Chih Tien, Chun-Chin Hsu, Chun-Yuan Cheng | ||||||||||
|
|||||||||||
| Additive Manufacturing Of Micro-Heat Exchangers | |||||||||||
| Page(s): | 18-22 | ||||||||||
| Author | Martina Koukolikova, Pavel Podany, Katerina Mertova | ||||||||||
|
|||||||||||
| Evaluating The Impacts of Waste and Development on Organizational Performance for Small to Medium Enterprises in Manufacturing | |||||||||||
| Page(s): | 1-4 | ||||||||||
| Author | Atefeh Sayad Saravi, Ali Mousavi, Rebecca Decoser | ||||||||||
|
|||||||||||
| Impact of Premixed Flame Properties of (CH4, C3H8, and C4H10) in Tubular Burner | |||||||||||
| Page(s): | 20-26 | ||||||||||
| Author | Hanin Nedal Alkalani | ||||||||||
|
|||||||||||
| Estimating Demand For Infrastructure In Northern States Of Malaysia | |||||||||||
| Page(s): | 1-6 | ||||||||||
| Author | Nor Aznin Abu Bakar, Muhammad Azam | ||||||||||
|
|||||||||||
| Study On Future Development Of The Intelligent Manufacturing System By Analyzing Manufacturing Systems Based On Business Process | |||||||||||
| Page(s): | 11-15 | ||||||||||
| Author | Mancun Song, Allen He, David Z. Zhang | ||||||||||
|
|||||||||||
| Environmental and Energy Efficiency Efforts Along with Creating Shared Value to The Community: An Initiative from Manufacturing Industry of Cement Tonasa, Pangkep - South Sulawesi, Indonesia. | |||||||||||
| Page(s): | 50-56 | ||||||||||
| Author | Dewi Permatasari, Magdalena Sumule, Bambang Eko Prasetyo, Bambang Haryanto | ||||||||||
|
|||||||||||
| Optimization of Technical and Economical Parameters of 4 Scenarios for the Production of Eggs in Al-Anbar Province, Iraq | |||||||||||
| Page(s): | 28-30 | ||||||||||
| Author | Mohammed Abdulrahman Mahal Al-Ani, Mohammed S.A., A.A. Al-Rawi | ||||||||||
|
|||||||||||
| Study Of EDM Parameters For Stainless Steel Grade Sus420j2 By Graphite Electrode Using Taguchi’s Method | |||||||||||
| Page(s): | 16-19 | ||||||||||
| Author | Apiwat Muttamara | ||||||||||
|
|||||||||||
| Enabling Richer Harvest Value Added Solutions for Agriculture Film and Irrigation Systems | |||||||||||
| Page(s): | 1 | ||||||||||
| Author | Daniel Van Houcke | ||||||||||
|
|||||||||||
| Occupational Health And Safety Facilities And Performance Of Workers In Manufacturing Industry: An Empirical Investigation | |||||||||||
| Page(s): | 6-13 | ||||||||||
| Author | Mohsin Ali Shaikh, Song Weiguo | ||||||||||
|
|||||||||||
| Women Entrepreneurs: A Study of Current Status, Challenges and Future Perspective in the State of Bihar | |||||||||||
| Page(s): | 9-16 | ||||||||||
| Author | Saurav Bishnu | ||||||||||
|
|||||||||||
| Surface Modifications and Morpho-Structural Investigations of Graphene Oxide for High-Performance Osteogenic Differentiation Biomarkers Detection | |||||||||||
| Page(s): | 11 | ||||||||||
| Author | Vlasceanu George Mihail, Tite Teddy Martial, Mariana Ionita | ||||||||||
|
|||||||||||
| ICT and International Market Share Dynamics | |||||||||||
| Page(s): | 1-6 | ||||||||||
| Author | Reza Khojastehroo | ||||||||||
|
|||||||||||
| Major Factors That Affect Staff During A Company Acquisition and Merger | |||||||||||
| Page(s): | 1-3 | ||||||||||
| Author | Avaan Sewpersadh, Vannie Naidoo | ||||||||||
|
|||||||||||
| Power Inadequacy, The Thorn in Economic Growth of Sub-Saharan Africa | |||||||||||
| Page(s): | 11-15 | ||||||||||
| Author | WS. Ebhota, PY tabakov | ||||||||||
|
|||||||||||
| Technology Transfer and Success Factors of SMEs Food Industry in Thailand: An Exploratory Study | |||||||||||
| Page(s): | 1-6 | ||||||||||
| Author | Kamol Panmaung, Rath Pichyangura, Pakpachong Vadhanasindhu | ||||||||||
|
|||||||||||
| Perception of Bhutanese Employees Towards Labor Unions | |||||||||||
| Page(s): | 61-64 | ||||||||||
| Author | Eugenia A. Boa, Rinchenlhamo | ||||||||||
|
|||||||||||
| Enabling Richer Harvest Value Added Solutions for Agriculture Film and Irrigation Systems | |||||||||||
| Page(s): | 7 | ||||||||||
| Author | Daniel Van Houcke | ||||||||||
|
|||||||||||
| The Relationship Between Employee Narcissism And Team-Member Exchange Quality: The Mediating Role Of Impression Management And The Moderating Role Of Work Group Tenure | |||||||||||
| Page(s): | 24 | ||||||||||
| Author | Il-Myeongjeong, Taigyu Kim | ||||||||||
|
|||||||||||
| The Formulation of New Concrete from Sand Dune of the Western Erg of Algeria | |||||||||||
| Page(s): | 6-13 | ||||||||||
| Author | A. Tafraoui, N. Seghouani | ||||||||||
|
|||||||||||
| Optimal Dynamic Lot-Sizing In A Reverse Logistics Environment With Unlimited Purchased Returns | |||||||||||
| Page(s): | 28-35 | ||||||||||
| Author | Moustapha Diaby | ||||||||||
|
|||||||||||
| The Application and Relevance of Costing Techniques in Service-Oriented Business Organizations: A Review of The Activity-Based Costing (ABC) Technique | |||||||||||
| Page(s): | 48 | ||||||||||
| Author | Udeh Nneka Evelyn | ||||||||||
|
|||||||||||
| Steps To Construct Apmi By Using Concepts Of PMI | |||||||||||
| Page(s): | 1-3 | ||||||||||
| Author | Tzu-Ling Tien, Tzong-Ru Lee, Wen-Shin Lin | ||||||||||
|
|||||||||||
| Factors Affecting the Export of Frozen Seafood Industry in Bangkok and Nearby Coastal Provinces | |||||||||||
| Page(s): | 6-9 | ||||||||||
| Author | Thepnarintra Praphanphat | ||||||||||
|
|||||||||||
| The Factors for Developing Trainers in The Auto Part Manufacturing Factories (AMF)in Amatanakon Industrial Estate, Cholburi Province | |||||||||||
| Page(s): | 10-14 | ||||||||||
| Author | Weerakarj Dokchan, Taweesak Roopsing | ||||||||||
|
|||||||||||
| Steps To Construct Apmi By Using Concepts Of PMI | |||||||||||
| Page(s): | 1-3 | ||||||||||
| Author | Tzu-Ling Tien, Tzong-Ru Lee, Wen-Shin Lin | ||||||||||
|
|||||||||||
| Small and Medium Scale Enterprises and Employment Generation in Edo State, Nigeria | |||||||||||
| Page(s): | 54 | ||||||||||
| Author | Mercy D. Dania, Michael D. Oisamoje, Obed Quiacoe | ||||||||||
|
|||||||||||
| Cleaning Validation Procedure of Manufacturing Equipment After Production of Sulfamethoxazole and Trimethoprime Tablets | |||||||||||
| Page(s): | 8-10 | ||||||||||
| Author | Saliha Guermouche, Radia Ouarezki | ||||||||||
|
|||||||||||
| Agile Project Management in Non-Software Product Development Teams: Levels of Usage and Critical Success Factors | |||||||||||
| Page(s): | 35-40 | ||||||||||
| Author | Jeff Totten, Louann Bierlein Palmer | ||||||||||
|
|||||||||||
| Production of Low-Carbon Construction Components from Industrial Scheduled Wastewater Sludge | |||||||||||
| Page(s): | 65-69 | ||||||||||
| Author | Mohamad Nidzam Rahmat, Norsalisma Ismail | ||||||||||
|
|||||||||||
| On the Significance of Challenges for Using Natural Corrosion Inhibitors in Sustaining Safe Environment | |||||||||||
| Page(s): | 20-22 | ||||||||||
| Author | Siamak Sadeghi | ||||||||||
|
|||||||||||
| Reliability-based Performance Measure for Stochastic Networks | |||||||||||
| Page(s): | 56-66 | ||||||||||
| Author | Wheyming Tina Song, Peisyuan Lin | ||||||||||
|
|||||||||||
| Reverse Logistics In Car Bumper Development | |||||||||||
| Page(s): | 50-52 | ||||||||||
| Author | Majid Davoodi Makinejad, Reza Ghaeli, Sinan Kayloylu | ||||||||||
|
|||||||||||
| Incorporating an Interactive 360 Degree Video Game Into A University-Level Biomanufacturing Lab Curriculum | |||||||||||
| Page(s): | 53-57 | ||||||||||
| Author | Xinyu Zhang, Emil Polyak, Ariana Ehuan, Jason Haskins | ||||||||||
|
|||||||||||
| Economy-Wide Learning: A Comparative Study of Manufacturing and Non-Manufacturing Sector in Japan. | |||||||||||
| Page(s): | 1-10 | ||||||||||
| Author | Aduba, Joseph Junior, Izawa, Hiroshi | ||||||||||
|
|||||||||||
| WHS awareness of Garments Workers in Bangladesh: Examining the gender differencein perception | |||||||||||
| Page(s): | 1-4 | ||||||||||
| Author | Fazluz Zaman, Chowdhury Hossan | ||||||||||
|
|||||||||||
| Manufacturing A Textilecomposite for Residential Purpose By Re-Use of Cellulosic Fiber as Substitute of Wooden Stuff with Compare its Shear Properties | |||||||||||
| Page(s): | 18 | ||||||||||
| Author | Syed Qutaba Bin.Tariq, Rehan Abbasi, Qasim Siddiqui, Zameer-Ul-Hassan | ||||||||||
|
|||||||||||
| Optimization of Wireless Sensor Networks Design for Energy Saving using Swarm Intelligence | |||||||||||
| Page(s): | 18 | ||||||||||
| Author | Alaa F. Sheta | ||||||||||
|
|||||||||||
| The Impact Of Logistics Industry On Manufacturing Production Efficiency In China | |||||||||||
| Page(s): | 52-55 | ||||||||||
| Author | Yetian Zheng, Nisit Panthamit | ||||||||||
|
|||||||||||
| Retention Effects in Post-Acquisition Strategic and Social Contexts: A Closer Look at How Retained Target Firm Executives Affect Acquisition Performance | |||||||||||
| Page(s): | 9-14 | ||||||||||
| Author | Shanshan Lin | ||||||||||
|
|||||||||||
| An Application Of Lathe Machine Chatter Analysis Based On Chua’s Circuit And Fractional-Order Lorenz Master-Slave Hybrid Chaotic System | |||||||||||
| Page(s): | 58-62 | ||||||||||
| Author | Xiao-Yi Su, Her-Terng Yau, Yu-Siung Guo, Li-Wei Wu, Chi-Shiuan Tsai, Mao-Chin Houng, Kuan-Ting Yu, Yu-Chieh Chou | ||||||||||
|
|||||||||||
| Industry 4.0 – An Indian Study | |||||||||||
| Page(s): | 1-5 | ||||||||||
| Author | Mauli Shah, Kush Adhvaryu, Navil Mehta, Vishal Wankhede | ||||||||||
|
|||||||||||
| Automation in on-Demand Manufacturing: The Cutting Line Automation | |||||||||||
| Page(s): | 32-36 | ||||||||||
| Author | Pirjo Elbrecht, Knut-Joosep Palm | ||||||||||
|
|||||||||||
| Econometric Applications of Adaptive and Semi-Parametric Regression in Social Sciences | |||||||||||
| Page(s): | 12 | ||||||||||
| Author | Sunil K Sapra | ||||||||||
|
|||||||||||
| Integration of IoT - Empowered Cloud Manufacturing Systems In Industrial Engineering | |||||||||||
| Page(s): | 1-4 | ||||||||||
| Author | S. Yeshwant Raj, Sarabesh Sriram, M. Sivaprakash | ||||||||||
|
|||||||||||
| BIST Architecture for Combinational Circuit | |||||||||||
| Page(s): | 5-12 | ||||||||||
| Author | Vanya Gupta, Garima Singh, Abhijit Asati | ||||||||||
|
|||||||||||
| Comparison of Industry Networks between taiwan and South Korea | |||||||||||
| Page(s): | 17 | ||||||||||
| Author | Shyh-Chyang Lin | ||||||||||
|
|||||||||||
| The Effect of POSS on the Adhesion Between Polyester Cord and Natural Rubber | |||||||||||
| Page(s): | 9 | ||||||||||
| Author | Nazli Yazici, Samet Dursun, Tugay Yarici, Burak Kiliç, Bagdagul Karaagac, Mehmet Kodal, Guralp Ozkoc | ||||||||||
|
|||||||||||
| Exchange Rate Changes and Manufacturing Output: An Empirical Assessment on Nigeria | |||||||||||
| Page(s): | 1-11 | ||||||||||
| Author | Okezie A. Ihugba, Ebomuche, N.C, Njoku, A.C | ||||||||||
|
|||||||||||
| TQM Practices in Automobile Industry of India - An Empirical Investigation | |||||||||||
| Page(s): | 14-16 | ||||||||||
| Author | Sivaraj Singaravelu, Anoop Mattuvayil | ||||||||||
|
|||||||||||
| Laser ND: YAG Welding of Glass Fiber Polypropylene, Polyamide and Polyester Composite to Thermoplastic Polyamide | |||||||||||
| Page(s): | 27-30 | ||||||||||
| Author | Antonio B. Pereiraa, Luis Sacrasa, Alfredo B. De Moraisb | ||||||||||
|
|||||||||||
| Laser ND: YAG Welding of Glass Fiber Polypropylene, Polyamide and Polyester Composite to Thermoplastic Polyamide | |||||||||||
| Page(s): | 23-26 | ||||||||||
| Author | Antonio B. Pereiraa, Luis Sacrasa, Alfredo B. De Moraisb | ||||||||||
|
|||||||||||
| The Symmetric Level of The Melt Pool with Different Scanning Strategies in Selective Laser Melting Process | |||||||||||
| Page(s): | 31-33 | ||||||||||
| Author | K.Q. Le, C. Tang, C. H. Wong | ||||||||||
|
|||||||||||
| Bi-Objective Parallel Machine Scheduling Problem With Flexible Maintenance and Jobs’ Release Times | |||||||||||
| Page(s): | 12-16 | ||||||||||
| Author | Ya-Chih Tsai, Fuh-Der Chou, Yarong Chen, Shenquan Huang | ||||||||||
|
|||||||||||
| National Culture and Manufacturing…Any Relationship | |||||||||||
| Page(s): | 1-5 | ||||||||||
| Author | Ahmed M Deif | ||||||||||
|
|||||||||||
| Development of High-Temperature Heat Exchangers Using Advanced Manufacturing Technologies | |||||||||||
| Page(s): | 1-4 | ||||||||||
| Author | Martina Koukolikova, Pavel Podany | ||||||||||
|
|||||||||||
| The Effect Of Strategic Maintenance On Productivity Performance In Modern Manufacturing Company | |||||||||||
| Page(s): | 1-10 | ||||||||||
| Author | Ita Mariza | ||||||||||
|
|||||||||||
| Using DEMATEL to Identify Key Factors for Companies to Achieve Sustainable Development | |||||||||||
| Page(s): | 1-7 | ||||||||||
| Author | Yi-Chun Kuo, Yi-Xuan Liu | ||||||||||
|
|||||||||||
| Impact of Lean Logistics on Green Supply-Chain Management, Environmental Performance, and Firm Performance | |||||||||||
| Page(s): | 8-13 | ||||||||||
| Author | Yi-Chun Kuo, Hung-Yu Lu | ||||||||||
|
|||||||||||
| Fused Deposition Modeling Technology for The Production Components of The Super-Efficient Shell Ecomarathon Car | |||||||||||
| Page(s): | 44-47 | ||||||||||
| Author | B. Opara, K. Sobczyk, M. Lewandowska, M. Banasiewicz | ||||||||||
|
|||||||||||
| Design of a Sliding Mechanism for The Positioning of a Lathe Cutting Tool | |||||||||||
| Page(s): | 1-4 | ||||||||||
| Author | Martin Pollák, Petr Baron, Monika Telišková, Marek Kočiško | ||||||||||
|
|||||||||||
| Implementation of Artificial Intelligence to Detect Images in The Manufacturing Process | |||||||||||
| Page(s): | 5-8 | ||||||||||
| Author | Marek KoÄŤiško, Juraj KundrĂk, Martin Pollák, Monika Telišková | ||||||||||
|
|||||||||||
| Monitoring of Production Process at Production of Components in Automotive Industry | |||||||||||
| Page(s): | 9-12 | ||||||||||
| Author | Jozef Dobránsky, Jozef SvetlĂk, Zigmund Doboš | ||||||||||
|
|||||||||||
| Development of High-Temperature Heat Exchangers using Advanced Manufacturing Technologies | |||||||||||
| Page(s): | 34-37 | ||||||||||
| Author | Martina Koukolikova, Pavel Podany | ||||||||||
|
|||||||||||
| Game Theoretical Analysis of Remanufacturing Quality and Capacity Choice | |||||||||||
| Page(s): | 8-13 | ||||||||||
| Author | Cheng-Han Wu | ||||||||||
|
|||||||||||
| Preparation and Application of The Organic Silica/Acrylic Acid/Optic Fiber Biosensor | |||||||||||
| Page(s): | 75 | ||||||||||
| Author | Shug-June Hwang, Kai-Xiang Zhan, Chih-Chun Yang, Shu-Ling Huang | ||||||||||
|
|||||||||||
| Management of Natural Resources and Sustainable Development: The Example of the Furniture Industry in Poland | |||||||||||
| Page(s): | 1-5 | ||||||||||
| Author | Anna Wisniewska-Salek, Edyta Kulej-Dudek | ||||||||||
|
|||||||||||
| Evaluation of Overall Equipment Effectiveness in Developing Country in Crankshaft Manufacturing | |||||||||||
| Page(s): | 1-7 | ||||||||||
| Author | S.Gholizadeh | ||||||||||
|
|||||||||||
| Examining Operational Effects of Imperfect Quality | |||||||||||
| Page(s): | 8-11 | ||||||||||
| Author | Moshe Eben-Chaime | ||||||||||
|
|||||||||||
| Up Or Down? Final Product Assembly Operations In Supply Chain Systems In The Additive Manufacturing ERA | |||||||||||
| Page(s): | 14-22 | ||||||||||
| Author | Yue Chen, Tsan-Ming Choi, Sai-Ho Chung, Shu Guo | ||||||||||
|
|||||||||||
| Comparison of Quality, Cost and Delivery Obtained Through Total Production Management | |||||||||||
| Page(s): | 45-48 | ||||||||||
| Author | Nagaraj Kamath, Sandeep Nayak | ||||||||||
|
|||||||||||
| Using DEMATEL to Identify Key Factors for Companies to Achieve Sustainable Development. | |||||||||||
| Page(s): | 1-7 | ||||||||||
| Author | Yi-Chun Kuo, Yi-Xuan Liu | ||||||||||
|
|||||||||||
| Impact of Lean Logistics on Green Supply-Chain Management, Environmental Performance, and Firm Performance | |||||||||||
| Page(s): | 8-13 | ||||||||||
| Author | Yi-Chun Kuo, Hung-Yu Lu | ||||||||||
|
|||||||||||
| The Problem and Solution Guidelines for Export Business Operations of Suitcase Manufacturing Industry in Thailand | |||||||||||
| Page(s): | 15-17 | ||||||||||
| Author | Weerakarj Dokchan, Thepnarintra Praphanphat | ||||||||||
|
|||||||||||
| Online Monitoring Mechanisms for Manufacturing Processes with Randomness and Fuzziness Information | |||||||||||
| Page(s): | 9-14 | ||||||||||
| Author | Bi-Min Hsu, Ming-Hung Shu, Wan-Chun Su, Chen-Yang Su, Ting-Yi Su | ||||||||||
|
|||||||||||
| The Role Of Industrial Designer In The Care Of Persons With Special Needs In Smart Cities | |||||||||||
| Page(s): | 10-16 | ||||||||||
| Author | Kareem Saber Mustafa | ||||||||||
|
|||||||||||
| Challenges in Manufacturing and Applications of Paper Products | |||||||||||
| Page(s): | 23 | ||||||||||
| Author | Barry Hojjatie | ||||||||||
|
|||||||||||
| Perceptions of Corporate Compliance Officers of Leadership Approaches Affecting Key Corporate Functions Leading to Corporate Sustainability | |||||||||||
| Page(s): | 55-59 | ||||||||||
| Author | Linda C. Gordon, David S. Kung, Frank Lin, Parvizpartow-Navid | ||||||||||
|
|||||||||||
| Computing Techniques, Trends and Types of Ecommerce | |||||||||||
| Page(s): | 31-35 | ||||||||||
| Author | Dhanyakumar Kurmude, Pradip Paithane, Sangeeta Kakarwal | ||||||||||
|
|||||||||||
| The Effect of Work Stress on The Performance of Readymade Garment Workers in Bangladesh | |||||||||||
| Page(s): | 31-40 | ||||||||||
| Author | Nazrul Islam, Pushpita Haque, Alvi Mubasshir, Suzern Noor, Mrittika Sadi, Samin Sakib | ||||||||||
|
|||||||||||
| Energy and Product Quality Challenges During Manufacturing and End-Use of Paper Products | |||||||||||
| Page(s): | 2 | ||||||||||
| Author | Barry Hojjatie | ||||||||||
|
|||||||||||
| An Investigation Into The Determinants of Auditor Switch in Indonesia’s Listed Companies | |||||||||||
| Page(s): | 7-11 | ||||||||||
| Author | Herry Sunarto | ||||||||||
|
|||||||||||
| Design and Implementation of Microcontroller Based Automatic Power Changeover Switch Between Mains Power Supply & Auxiliary Power Supply | |||||||||||
| Page(s): | 17-23 | ||||||||||
| Author | Prince .N. Nwankwo, Mary. N. Orji | ||||||||||
|
|||||||||||
| The Effect of Knowledge Accumulation Strategies on Firm Growth: experience vs. Experimentation | |||||||||||
| Page(s): | 7 | ||||||||||
| Author | Chulwoo Baek, Taewonkang | ||||||||||
|
|||||||||||
| An Investigating The Role Of Service Marketing In An Emerging Economy: In Oman’s Perspective | |||||||||||
| Page(s): | 57-61 | ||||||||||
| Author | Mohamed Haneefuddin | ||||||||||
|
|||||||||||
| Factors Impacting the Export Performance of SMEs: An Exploratory Developing Country Study | |||||||||||
| Page(s): | 1-11 | ||||||||||
| Author | Godwell Karedza, Krishna Govender | ||||||||||
|
|||||||||||
| Performance Difference between Unmarried and Married Female Employees at Garment Industry in Bandung, Indonesia | |||||||||||
| Page(s): | 8-11 | ||||||||||
| Author | Nindya Daniswara | ||||||||||
|
|||||||||||
| Nail Fashion 4.0 Technology: A Case Study on the Stage-Gate Model | |||||||||||
| Page(s): | 25-28 | ||||||||||
| Author | Hilary Cheng, Yi Chuan Lu, Vanessa Hsia | ||||||||||
|
|||||||||||
| Analysis of using Ultrasonic Vibration on Ball-Swaging Process for Head Stack Assembly of Hard Disk Drive by Finite Element Method | |||||||||||
| Page(s): | 29-33 | ||||||||||
| Author | Chat Chaiboon, Teetut Dolwichai | ||||||||||
|
|||||||||||
| Profile Error Analysis Of Involute Gears Made By Form Grinding | |||||||||||
| Page(s): | 45-50 | ||||||||||
| Author | Chin-Lung Huang | ||||||||||
|
|||||||||||
| Bio-Inspired Metaheuristics Search Algorithms for Optimizing Manufacturing Process | |||||||||||
| Page(s): | 1-8 | ||||||||||
| Author | Yang Lie, Sheta Alaa | ||||||||||
|
|||||||||||
| A Review on Selective Laser Melting of Ti6Al4V: Microstructure and Properties | |||||||||||
| Page(s): | 20-25 | ||||||||||
| Author | Andriya Narasimhulu, Kanav Bhatia, Nitish Kumar | ||||||||||
|
|||||||||||
| An Analysis of India’s Textile Exports in Context of Regional Comprehensive Economic Partnership | |||||||||||
| Page(s): | 88-93 | ||||||||||
| Author | Parmjeet Kaur, Sandeep Kaur Bhatia | ||||||||||
|
|||||||||||
| Utilization of New Definitions to Calculate Overall Equipment Effectiveness for Air Compressors: A Case Study | |||||||||||
| Page(s): | 19-29 | ||||||||||
| Author | Mostafa Larky, Masoud Ghazizadeh Ahsaee, Amir Reza Amiri Lolaki, Mehdi Falahatkar, Hamidreza Javidrad | ||||||||||
|
|||||||||||
| Example of Cross-Disciplinary Approach in Education | |||||||||||
| Page(s): | 7-12 | ||||||||||
| Author | Richard J. Kirton, Igor A. Gorlach | ||||||||||
|
|||||||||||
| Blue Ocean Strategy Investigation as a Formulation of Competitive Strategies on Small and Medium Small Businesses | |||||||||||
| Page(s): | 1 | ||||||||||
| Author | Ike Kusdyah Rachmawati, Agus Rahman, Dan Syarif Hidayatullah | ||||||||||
|
|||||||||||
| Artificial Intelligence for Business: Opportunities and Challenges | |||||||||||
| Page(s): | 12-17 | ||||||||||
| Author | M P Sebastian | ||||||||||
|
|||||||||||
| Adaptive Network-Based Fuzzy Inference System (ANFIS) Application on Modeling of Glass/Epoxy Composites for Drilling Operation | |||||||||||
| Page(s): | 17-21 | ||||||||||
| Author | Semih Ozden, Ahmet Mavi | ||||||||||
|
|||||||||||
| Slow Release Nitrogen Fertilizer Based on Chicken Eggshell Waste and Hydroxyapatite for Potential Agricultural Applications | |||||||||||
| Page(s): | 1-6 | ||||||||||
| Author | Wara Dyah Pita Rengga, Lu’luatul Khoiriyah, Kega Amalania Salsabiil, Lutfiana Rahmanda Ikna Dewi | ||||||||||
|
|||||||||||
| Electroless Plating of Electrum on 3D-Printedam-Lpbf Alsi10mg Parts | |||||||||||
| Page(s): | 53-56 | ||||||||||
| Author | Alexandra Inberg, Dana Ashkenazi, Yosi Shacham- Diamand, Adin Stern | ||||||||||
|
|||||||||||
| SMEs Strategies in Managing Corporate Debt Problem and Government Influence towards Indonesian SMEs Development | |||||||||||
| Page(s): | 5-11 | ||||||||||
| Author | Muhammad B Andaru | ||||||||||
|
|||||||||||
| Heterogeneous Impact of Non-Tariff Measures Through The Global Value Chains: Empirical Evidence from China | |||||||||||
| Page(s): | 5-14 | ||||||||||
| Author | Qizhong Yang, Tsunehiro Otsuki | ||||||||||
|
|||||||||||
| Parameters Affecting Spring Back for Vehicle Body Part With Finite Element Simulation | |||||||||||
| Page(s): | 20-23 | ||||||||||
| Author | Ali Baki | ||||||||||
|
|||||||||||
| The Distance from a Point to a Parabola in 2D | |||||||||||
| Page(s): | 1-4 | ||||||||||
| Author | Chang-Chien Chou, Che-Chi Yang | ||||||||||
|
|||||||||||
| Heuristic Algorithm for The Toolpath Planning Amongasequencedofellipses in 2D | |||||||||||
| Page(s): | 5-9 | ||||||||||
| Author | Chang-Chien Chou, Che-Chi Yang, Tse-Yang Liu | ||||||||||
|
|||||||||||
| Evolution of a Promising PLCL Biodegradable In-Situ Nano-Depot for a Sustained Subcutaneous Delivery | |||||||||||
| Page(s): | 76-80 | ||||||||||
| Author | Hussein Ammar, Alia Badawi, Dina Mostafa, Rabab Kamel, Sally Abou-Taleb | ||||||||||
|
|||||||||||
| The Effect of Team Work on Reducing Manufacturing Costs and Increasing Productivity | |||||||||||
| Page(s): | 17 | ||||||||||
| Author | Mehdi Soufi, Sahar Norouzi | ||||||||||
|
|||||||||||
| Configurable Business Processes in Enterprise Resource Planning (CBP-ERP) Systems “A Case Study on Open Source ERP (Adempiere)” | |||||||||||
| Page(s): | 12-18 | ||||||||||
| Author | Alhaji Sheku Sankoh | ||||||||||
|
|||||||||||
| Using Blockchain to Manage Air Cargo Security | |||||||||||
| Page(s): | 1-6 | ||||||||||
| Author | Jeff Hy Yeung, Jimmy Wl Pang | ||||||||||
|
|||||||||||
| A Review of Literature on Quality of Work Life and Job Satisfaction of Teacher | |||||||||||
| Page(s): | 14-17 | ||||||||||
| Author | Unnop Panpuang, Ladda Hirunyava, Sivaphong Orpong, Nattapol Sarat, Aungsumalin Noppornpikulsakul | ||||||||||
|
|||||||||||
| Numerical Analysis of Nanoparticle Concentration Effect on Thermo-physical Properties of Nanofluid in a Square Cavity | |||||||||||
| Page(s): | 5-10 | ||||||||||
| Author | Sangotayo Emmanuel O., Hunge Oluwashina N. | ||||||||||
|
|||||||||||
| Industry 4.0 and the Future for Dairy Supply Chains | |||||||||||
| Page(s): | 1-7 | ||||||||||
| Author | Cristiani Eccher, John Geraghty | ||||||||||
|
|||||||||||
| Development of Wound Healing Formulation using Honey and Whey Protein | |||||||||||
| Page(s): | 36 | ||||||||||
| Author | Munamordialzahrani, Hanaa Abbas Yamani | ||||||||||
|
|||||||||||
| To Study Whether the Managers are Effectively Ready for Industry 4.0 - With Reference to Bangalore City, India | |||||||||||
| Page(s): | 1 | ||||||||||
| Author | Ravikeerthi J V | ||||||||||
|
|||||||||||
| The Intervening Effect of Relational Capital on The Relationship Between Strategic Innovations and SME Performance | |||||||||||
| Page(s): | 2 | ||||||||||
| Author | Nagwan Alqershi, Zakaria Bin Abbas, Sany Sanuri Mohd Mokhtar | ||||||||||
|
|||||||||||
| Numerical Analysis of Nanoparticle Concentration Effect on Thermo-physical Properties of Nanofluid in a Square Cavity | |||||||||||
| Page(s): | 5-10 | ||||||||||
| Author | Sangotayo Emmanuel O., Hunge Oluwashina N. | ||||||||||
|
|||||||||||
| A New Advanced Manufacturing Technology Model for Small, Medium Enterprise Food Industry | |||||||||||
| Page(s): | 1-4 | ||||||||||
| Author | Mohd Norhasni Mohd Asaad, Che Azlan Taib, Mohd Akhir Ahmad, Rosman Iteng | ||||||||||
|
|||||||||||
| Examining the Relationships Between Employee Perceptions of Management's Commitment to Safety and the Safe Behaviour of Employees: A Study in Turkey | |||||||||||
| Page(s): | 15-20 | ||||||||||
| Author | Serpil Aytac, Salih Dursun | ||||||||||
|
|||||||||||
| The Effects of Technologies that are Used in the Manufacturing Process on Job Satisfaction: The Case of the Turkish Garment Sector | |||||||||||
| Page(s): | 21-24 | ||||||||||
| Author | Ă–zlem Kaya | ||||||||||
|
|||||||||||
| Study of Alignment Between Potential and Leading Sectors in Sambas, West Kalimantan, Indonesia | |||||||||||
| Page(s): | 27 | ||||||||||
| Author | Elistia | ||||||||||
|
|||||||||||
| Shape Memory Alloys Hybrid Actuators | |||||||||||
| Page(s): | 18-21 | ||||||||||
| Author | Girolamo Costanza, Maria Elisa Tata | ||||||||||
|
|||||||||||
| Image Analysis of Modular Units using Computer Vision | |||||||||||
| Page(s): | 21 | ||||||||||
| Author | Hongjin Kim, Hyeongjin Ji, Jihoon Oh | ||||||||||
|
|||||||||||
| A New Advanced Manufacturing Technology Model for Small, Medium Enterprise Food Industry | |||||||||||
| Page(s): | 1-4 | ||||||||||
| Author | Mohd Norhasni Mohd Asaad, Che Azlan Taib, Mohd Akhir Ahmad, Rosman Iteng | ||||||||||
|
|||||||||||
| Configurable Business Processes in Enterprise Resource Planning (CBP-ERP) Systems “A Case Study on Open Source ERP (Adempiere)” | |||||||||||
| Page(s): | 20-26 | ||||||||||
| Author | Alhaji Sheku Sankoh | ||||||||||
|
|||||||||||
| Measuring Technical Efficiency and Productivity of KSK Food Products Distributors in Metro Manila Area 2017 – 2018: An Application of Slack-Based DEA Model | |||||||||||
| Page(s): | 10-12 | ||||||||||
| Author | Marisa M. Santiago, Irene A. Ceniza, Babeth Isa S. Fernando | ||||||||||
|
|||||||||||
| The Relationship Between ISO 14001 and the Indonesian Green Industry Award : A Delphi Study | |||||||||||
| Page(s): | 52-59 | ||||||||||
| Author | Suryo Hadiyono, Rahmat Nurcahyo, Muhammad Dachyar | ||||||||||
|
|||||||||||
| Design, Manufacturing and Testing of Ovality Checking Gauge for Facilitating Mechanical Inspection and Quality Control | |||||||||||
| Page(s): | 23-29 | ||||||||||
| Author | Pradip Chakraborty | ||||||||||
|
|||||||||||
| The Business Success Factors of Manufacturers who want to Upgrade their Products to Become One Tambon One Product (OTOP), Ranong, Thailand | |||||||||||
| Page(s): | 86-92 | ||||||||||
| Author | Nithcha Kumpecharat | ||||||||||
|
|||||||||||
| Innovation and Sustainability Dynamics in Manufacturing: A Structural Equation Modelling Approach | |||||||||||
| Page(s): | 9-19 | ||||||||||
| Author | Aftab Ara | ||||||||||
|
|||||||||||
| The Manufacturing Economy Drive in Africa and its Effect on The Environment and Health Promotions -A Case Study of Ghana- | |||||||||||
| Page(s): | 10 | ||||||||||
| Author | Richmond Lamptey | ||||||||||
|
|||||||||||
| Augmented Reality as a Disruptive Digital Technology | |||||||||||
| Page(s): | 1-4 | ||||||||||
| Author | Mohamed Debache, Vincent Sabourin | ||||||||||
|
|||||||||||
| The Relationship between Technology, Environment and Firm Performance through ERP Implementation | |||||||||||
| Page(s): | 45-48 | ||||||||||
| Author | Janjira Deelert, Natnarongjaturat, Chanongkornkuntonbutr | ||||||||||
|
|||||||||||
| The Leader-Member Exchange Influence on Employees’ Work Outcomes | |||||||||||
| Page(s): | 10-11 | ||||||||||
| Author | Omer Faruk Derindag, Ozgur Demirtas, Neslihan Derin | ||||||||||
|
|||||||||||
| Modelling Approaches to Evaluate the Impact of RFID Technology on the Bullwhip Effect with Respect to Inventory Inaccuracy | |||||||||||
| Page(s): | 12-16 | ||||||||||
| Author | Maria Drakaki, Hacer Güner Gören, Panagiotis Tzionas | ||||||||||
|
|||||||||||
| Paradigm Architectural Education for the IR 4.0 Era | |||||||||||
| Page(s): | 5-11 | ||||||||||
| Author | Ahmed M. Shehata, Mohammed F. M. Mohammed | ||||||||||
|
|||||||||||
| Impact of Building Materials on Biodiversity | |||||||||||
| Page(s): | 1 | ||||||||||
| Author | Rohit Mukherjee, Madhumita Roy | ||||||||||
|
|||||||||||
| Reinforcement Learning Performance for Complex Job-Shop Scheduling Problems in Manufacturing System | |||||||||||
| Page(s): | 19-24 | ||||||||||
| Author | Muhammad Saqlain, Qasim Abbas, Jong Yun Lee | ||||||||||
|
|||||||||||
| Drying of Sago Hampas in a Fluidized Bed Dryer | |||||||||||
| Page(s): | 1-8 | ||||||||||
| Author | Vinotharan Ravichandar, Masli Irwan Rosli | ||||||||||
|
|||||||||||
| The Role of HR Technology in Staffing Practices: Challenges and Opportunities | |||||||||||
| Page(s): | 1-13 | ||||||||||
| Author | Mussie Tessema | ||||||||||
|
|||||||||||
| Study on E-Learning Effectiveness and Outcomes | |||||||||||
| Page(s): | 7-10 | ||||||||||
| Author | Shikha Gupta | ||||||||||
|
|||||||||||
| Product Life Cycle Modeling through Sustainability – A Multi Criteria Assessment Approach | |||||||||||
| Page(s): | 12-15 | ||||||||||
| Author | Ankush Anand | ||||||||||
|
|||||||||||
| Product Life Cycle Modeling through Sustainability – A Multi Criteria Assessment Approach | |||||||||||
| Page(s): | 12-15 | ||||||||||
| Author | Ankush Anand | ||||||||||
|
|||||||||||
| Significance of Materials Science for the Future Development of Societies | |||||||||||
| Page(s): | 6-17 | ||||||||||
| Author | Tagnite Dongmo Yanick, Billy Besong Bate, Nkwenti Neville Ajamfa | ||||||||||
|
|||||||||||
| Advanced Hard Metals for Mining, Construction and Wear Parts in Particular Obtained by Additive Manufacturing | |||||||||||
| Page(s): | 1-3 | ||||||||||
| Author | I.Konyashin, B.Ries | ||||||||||
|
|||||||||||
| Study on E-Learning Effectiveness and Outcomes | |||||||||||
| Page(s): | 7-10 | ||||||||||
| Author | Shikha Gupta | ||||||||||
|
|||||||||||
| Stochastic Lot-Sizing Schedule of Production and Remanufacturing in Closed Loop Supply Chain for Construction Waste Recycling | |||||||||||
| Page(s): | 15-20 | ||||||||||
| Author | Shi, Shupei, Murata Tomohiro | ||||||||||
|
|||||||||||
| SD Model For Strategic Capacity Planning for Closed-Loop Supply Chain with Collection and Remanufacturing | |||||||||||
| Page(s): | 21-26 | ||||||||||
| Author | Ben Souissi Sofiene, Murata Tomohiro | ||||||||||
|
|||||||||||
| Reinforcement Learning Performance for Complex Job-Shop Scheduling Problems in Manufacturing System | |||||||||||
| Page(s): | 1-6 | ||||||||||
| Author | Muhammad Saqlain, Qasim Abbas, Jong Yun Lee | ||||||||||
|
|||||||||||
| Heat Integrated Synthesis of PET Polymer using Dual Reactive Distillation Technique | |||||||||||
| Page(s): | 1-5 | ||||||||||
| Author | Vandana Sakhre | ||||||||||
|
|||||||||||
| Knowledge Spillovers in a North-South Analysis of the U.S. Chemical Industry | |||||||||||
| Page(s): | 1-4 | ||||||||||
| Author | Gerald Simons | ||||||||||
|
|||||||||||
| Intersectoral Spillover Effect of Technical Progress: Case Study of Lithuanian Manufacturing Industry | |||||||||||
| Page(s): | 44-52 | ||||||||||
| Author | Mantas Markauskas, Asta Saboniene | ||||||||||
|
|||||||||||
| Image Super Resolution via External Learning based Techniques: A Review | |||||||||||
| Page(s): | 1-9 | ||||||||||
| Author | Ruaa A. Alfalluji, Zainab Dalaf Katheeth | ||||||||||
|
|||||||||||
| Problem and Need for Helping in the Business Operation of Plastic mold Manufacturing Industry of Thailand | |||||||||||
| Page(s): | 6-9 | ||||||||||
| Author | Weerakarj Dokchan, Thepnarintra Praphanphat | ||||||||||
|
|||||||||||
| My People: A Real-time Manpower Planning Resources and Control System for Production Process Lines in Manufacturing Companies | |||||||||||
| Page(s): | 7-10 | ||||||||||
| Author | Mark Adrian Ruiz, Reymark Natividad | ||||||||||
|
|||||||||||
| Main Limitations and Problems in Additive Manufacturing Process for the Aerospace Industry | |||||||||||
| Page(s): | 1-5 | ||||||||||
| Author | Sadettin Cem Altiparmak | ||||||||||
|
|||||||||||
| Comparative Study on the Implementation of Lean Manufacturing Tools in Manufacturing Company | |||||||||||
| Page(s): | 1-4 | ||||||||||
| Author | Mohd Adzrie, Elcy Keffnus | ||||||||||
|
|||||||||||
| Advanced Manufacturing Technology and Organizational Performance: The Mediating Role of Modern Management Accounting Techniques Implementation | |||||||||||
| Page(s): | 1-7 | ||||||||||
| Author | Shadi Maher Al-Khasawneh, Wan Anisahendut, Nik Mohdnorfadzilah Bin Nikmohd Rashid | ||||||||||
|
|||||||||||
| Green Energy using Technology | |||||||||||
| Page(s): | 1-6 | ||||||||||
| Author | Geetanjali R | ||||||||||
|
|||||||||||
| Benefits of Applying the 5S Model to Industrial Companies in Peru | |||||||||||
| Page(s): | 1-8 | ||||||||||
| Author | Bertha Diaz-Garay, Maria Teresa Noriega Aranibar | ||||||||||
|
|||||||||||
